24
2. Use instructions
2.11. Washing
the
T13
current setting reset key (fig. 26), combined with pressing the
M
knob, allows to access the Washing
functions. the oven equipped with automatic washing has 4 washing levels: L1=soft, L2=normal, L3=intensive,
ma=manual.
therefore by pressing the
T13
key and the
M
knob at the same time, the
D6
display shows the number relative
to the washing level and the
D2
display shows the washing duration. the washing level indicates the degree of
intesity of the same.
the washing cycle is started by pressing the
start
T16
key. the beginning of the washing
cycle is confirmed by the
D1
display that shows
the CLn writing.
The manual washing of the cooking
chamber.
the washing cycle is made up of 4 phases:
• in the first phase, of the duration of 5", steam
is generated in the compartment to dampen the
surfaces;
• upon the acoustic signal warning completion
of the first phase, open the oven door and
spray the compartment doors with a detergent
for ovens. do not Use CHLoRine based
PRodUCts;
• close the oven door. a new steam cycle is
starting;
• upon acoustic signal, open the oven door and
sufficiently rinse using appropriate sprayhead.
in ovens equipped with automatic washing
function, the above described phases happen
automatically. With this type of ovens, to
perform the washing, connect the pump to a
tank of detergent.
in ovens that are not equipped with automatic
washing only the manual function is available.
90
88
88
2
88
8
88
88
88
M
fig. 26
T13
D2
D1
D6
Summary of Contents for STEAM BOX SBPE061
Page 44: ...0051 ...
