5
steam-boX. installation, use and maintenance manual
all materials used for packaging are compatible
with the environment; they must be safely kept and
disposed of according to the standard in force.
the oven must be levelled: to regulate the height of
the adjustable feet act, using as reference a spirit
level, as shown in
fig. 2
.
significant unevenness or inclinations can negatively
influence the functioning of the oven.
slowly remove all protective film from the appliance
external panels, being careful not to leave traces of
adhesive.
Check that the heat disposal or inlet slots and
openings are not obstructed.
1. Installation
1.2. Positioning
1.3. Adjustment of the hinges and closing pin of the door
once the oven has been correctly positioned in its
designated place for installation, check the closing
and seal of the gaskets on the oven compartment
door.
the door hinges must be adjusted to assure maximum
seal of the oven door during its functioning. it is
possible to adjust both the upper and lower hinges.
if required, to adjust the door seal, loosen the bolt
(
fig. 3
) and move the door in wanted position. once
adjusted, fasten the bolt again.
the door's closing pin can be adjusted both in height
and in depth to eliminate any steam emissions during
cooking.
to adjust the position of the door's closing pin,
loosen the bolt (
fig. 4
) and move the pin in wanted
position (high/low); it is also possible to tighten the
pin to increase door pressure against the gasket or
loosen the pin to decrease it. once adjusted, fasten
the bolt again ensuring to have positioned the lock
closing anchoring downwards.
fig. 3
fig. 2
fig. 4
Summary of Contents for STEAM BOX SBPE061
Page 44: ...0051 ...
