![Giorik KB061WT Specification, Installation & Operation Manual Download Page 55](http://html1.mh-extra.com/html/giorik/kb061wt/kb061wt_specification-installation-and-operation-manual_2228798055.webp)
Page 54
Due to continuous product research and development,
the information contained herein is subject to change without notice.
www.stoddart.com.au
www.stoddart.co.nz
5.0 Cleaning and Maintenance
5.1.7 Cleaning Internal Cavity
Before running the automatic cleaning cycle the oven may require large soil/waste to be
manually removed
1. Remove any loose soil from the oven cavity and around the drain using a clean damp
cloth
2. Remove the drain can cover and dispose of soil. Do not push/force solid waste into the
drain. This is to prevent blockages and possible back-flow
3. Re-insert the drain cover
Normally, the automatic wash cycles clean internal racks effectively.
However if required, these can be easily removed.
1. Lift the rack and slide backward, lift away from the mounting screws
2. Clean using warm soapy water, rinse thoroughly and dry
3. Reinstall into the oven
5.1.9 Cleaning Internal Rack
5.1.8 Cleaning Glass Door
The door glass can be cleaned both on the outside and on the inside.
1. Rotate the two latches that lock the internal glass door
2. Swing internal glass door open
3. Clean with warm soapy water and a clean cloth
Never use abrasive materials
4. Close the glass door, rotate the two latches back into position