Page 15
Due to continuous product research and development,
the information contained herein is subject to change without notice.
www.stoddart.com.au
www.stoddart.co.nz
3.0 Installation
1
2
3
4
• Remove the unit control dials
• Using a Phillips head screwdriver, remove the two front
fascia retaining screws, then remove the front fascia by
lifting the fascia up and out
• Using a Phillips head screwdriver, remove the rear cover
plate and retaining screws
• On the side of the units to be connected, using long nose
pliers remove the fill caps
3.2 Line-up Connection
WARNING
Must be installed only by an authorised service person
If the unit is already installed and connected to power, the
power
to the equipment must be turned off and isolated.
FAILURE TO DO SO MAY RESULT IN ELECTRIC SHOCK.
