background image

Oversink and Undersink Water Heater 
 

 

- 6- 

1.6

 

Vessel 

The water heater vessel base material is glass line steel. 

1.7

 

Anode 

The magnesium anode fitted inside the appliances, together with the special treatment inside the vessel, 
guarantees protection against corrosion of the tank. 

1.8

 

Meaning of the symbols used herein 

Symbol 

Meaning 

 

Failure to comply with the provision in question may result in injuries and/or damages to 

people, objects, 

plants or animals.

 

1.9

 

Measuring 

The measuring units used in this manual for dimensions are those of the International System (SI). 
 

2

 

SAFETY 

2.1

 

Wall mounting

 

The wall on which the unit is to be installed must be capable of supporting (locally) the weight (Technical data table) of 
the full unit. 
Do not install the water heater on walls where the mechanical strength is compromised when damp. 
After checking that  wall is strong enough fix 2 hooks of suitable size (not supplied) to it, making sure they a securely 
anchored. Then hang the appliance on the hooks by means of the support bracket 

2.2

 

Electrical 

The water heater should have 230V-8,7A electrical supply. 
All electrical terminal covers must be screwed on before power is switched on. 
The unit must be earthed. 
The pipework to and from the unit must be earth bonded. 

2.3

 

Unvented 

The water heater is classed as an unvented cylinder. 
No valves must be fitted between the vessel and PRV. 
No valves must be fitted between the vessel and its expansion vessel. 

2.4

 

Personal protection 

When installing and servicing the appliance, recommend the use of suitable protective clothing (i.e. gloves). 

2.5

 

Delivery and packaging 

The water heater is supplied in an environment-friendly and easy to handle cardboard packaging with protective inserts. 
Make sure that the packaging material is disposed of properly in compliance with the local environment-related 
regulations in force. 
Should the water heater show any clear signs of any transport damage, then you should inform the supplier and return it 
immediately to the whole seller. Do not attempt to install the appliance what so ever. 
 

 

Summary of Contents for Style 10L 2kW Oversink























Reviews: