Start and place the rubber mirror base grommets on the back of each
mirror. Align the holes of each mirror with the grommet holes on the
windshield and the ones on the windshield bracket.
Secure the mirrors into place with the bolts (f) on the outside, and the
nuts (n) on the inside.
Windscreen (Part 2)
It is now time to connect the windshield to the rooftop, completing the
canopy. First align the holes of the roof top over top of the holes on the
windshield. Then secure each mounting point with a bolt (d) passing
through the following layers and hardware in order; rooftop, small
rubber washer (s), windshield, small metal washer (r), nut (n). Because
the layers are both plastic,
carefully
tighten all hardware.
17
