Installation
8
TYPICAL INSTALLATION
The above illustration shows a typical clean pet vac system installation. As you can see, the
separation tank and the vacuum unit are located in an “equipment room” away from the wash
tub/grooming area.
1. Attach the vacuum in accordance to the vacuum’s installation and operation manual.
2. Once the vacuum is mounted, locate the separator tank within 10’ of the vacuum.
3. Next mount the relay-controlled outlet within 10’ of the vacuum and within 6’ of a 15 amp
GFI dedicated outlet.
4. If routing the vacuum hose through a wall, you must drill a 1 1/2” hole in the wall to ac-
commodate it.
PLEASE NOTE:
It is highly recommended that the vacuum and separation tank be located
in a room other than the pet wash tub area. This will ensure that no animals are startled or
scared by the sound of the vacuum during operation.
