HOW TO OPERATE
6
Ginnys.com 800-544-1590
5.
Never plug on the per-
colator without water inside its
pot, or the appliance will cutoff
automatically. Element inside
may burn out
WARNING:
Never plug the percolator into an outlet without water in
the pot. The heating element may be damaged.
1. Add
cold water to the empty pot according to the number of cups of
coffee you want to make (cup levels are marked inside the pot). Do not
add water beyond the 10 cup level.
2. Lower the water pipe into the percolator pot until you fit the bottom of
the water pipe into the divot at the bottom of the pot. Then add the
basket to the water pipe.
3. Add coffee to the coffee basket. If making 10 cups, start with ½ cup of
coffee, and adjust depending on how strong you like your coffee. The level
of coffee should be lower than the edge of the coffee filter by ½", or the
coffee grounds may overflow during heating.
4. Put the basket cover on the coffee basket. Add the lid and press down to
lock it into position.
5. Connect the cord to an outlet and turn on the power to start brewing
coffee. Do not open the lid when the percolator is heating.
6. When the temperature of the water reachs about 210°F, the pot will stop
percolating and switch to keep warm (the indicator light will turn on). This
means your coffee is ready.
7. Before pouring the coffee from the pot, remove the water pipe, basket
and coffee grounds.
8. Unplug the percolator after using.
