TROUBLESHOOTING
10
Ginnys.com 800-544-1590
The iron is not hot
enough
Enough time has not
been allowed for iron
to heat properly; the
temperature dial is set
too low; the iron is not
plugged in
Wait until the power
light has gone off;
reset the temperature
dial to a higher tem-
perature; ensure the
iron is plugged in.
Leaking water from
the soleplate
The temperature dial
is set too low; the
iron is not plugged in;
there is too much wa-
ter in the water tank
Reset the temperature
dial to a higher
temperature; ensure
the iron is plugged in;
pour out the excess
water until the water
line is below Max.
No burst of steam
The burst of steam
function has been
used too often within
a short period of time;
the iron is not hot
enough
Continue ironing in
the horizontal position
and wait 5 seconds
before using the burst
of steam button again;
reset the temperature
dial to a higher
temperature.
The iron is not making
steam
There is too much
water in the water
tank; the steam dial is
set to 0
Pour out the excess
water until the water
line is below Max;
reset the steam dial.
Not enough steam
The steam dial is not
set to the proper
position; water tank
is empty; the steam
vents are blocked
Reset the steam dial to
the proper position; fill
the water tank; Clean
with the self-cleaning
function or by using
toothpicks.
Not spraying
The water tank is
empty
Fill the water tank.