GINGKO clickclock, Manual

Page: 2 / 17

ENGLISH
It
looks like a plain block of wood, but make a sound (clap your hands or tap on the top) and it will light up instantly with the time, date
and temperature, which display alternately. The clock can be set to display continually or to display for a few seconds when you make a
sound. Press the 'V/S' button at the back to turn on/off the sound activation function. It's strongly recommended to have sound activation
function turned ON to save more energy or save batteries life.
PRODUCT FEATURES

Displays Time, Date, and Temperature alternately, and can also be set to display time only

Sound activated.

12 and 24 hour formats can be selected (initial mode: 24 hour).

Alarm clock with “beep” sound lasting 1 minute.

5/ 7 days alarm with snooze function

The LED display will be off but the clock will still be running.

In-built rechargeable lithium battery to have a wire-free display
INSTALLATION
1, Take the clock and plug adapter from the package and place it in a safe place
2, Switch on the clock by pressing and holding down the ON/OFF button for 5 seconds, then LED display will instantly light up on the front
of the clock. If not, please recharge the clock first and refer to the below charging instruction as below.
3, When the LED display is on, please go to the setting instructions to set your clock.
CLOCK CHARGING INSTRUCTIONS
1, The clock has been initially fully charged when you open the packaging box and the battery should last 7 days if in permanent display
mode and approximately 3 months in sound activation display mode.
2, The LED display will start to faint when the clock has low battery. You will need to recharge the clock as soon as possible;
3, Please only use the DC/AC adapter included with the clock to charge the clock; when the clock is charging, the red charging indication
LED light will light up. When it’s fully charged, the LED light will turn green.
4, Charging time can take up to 3-4 hours. Please remove the charging adapter when it’s fully charged.
5, We advise you to set the clock on sound activation display to save energy, unless you really need to have it on permanent display.
6, You can also use the charging DC adapter to power the clock rather than using the built-in rechargeable battery.