GINGKO clickclock, Manual

Page: 4 / 17

TEMPERATURE & DATE FORMAT SETTING INSTRUCTIONS

Press UP to change the temperature format between
0
C/
0
F in normal time display mode

Press UP button and hold it down for 3 seconds until hearing a beep to change the date format between DD/MM and MM/DD
ALARM SETTING INSTRUCITONS
(This clock can be set with 3 different alarms; and each alarm can be set with “normal alarm mode” or “week day alarm mode”)
‘ 7 :AL ‘ - 7 days alarm mode: the alarm will go off 7 days a week
‘ 5 : AL ‘ - 5 days alarm mode: the alarm will go off on week days only

Press the DOWN button to access the alarm setting when it’s in normal display and the clock will initially be on showing “5:
AL” , press UP and DOWN to choose the alarm mode you want to set, then press SET to confirm and it will bring you to the first
alarm setting screen

the first alarm is initially turned off with display '- -:A1' (to turn alarm ON press UP button to show '0:00') To turn OFF press
DOWN button.

To set the first alarm, press SET when it’s displaying “0:00”, the hour section will flash and then press UP and DOWN buttons to
adjust the hour; press SET again, the minute will flash and press UP and DOWN to adjust minute.

After adjusting time, press SET again. It will go to the second alarm time, initial display will be ‘- -:A2’ (to turn alarm ON press
UP button to show '0:00') To turn off press DOWN button. Follow the same instructions as above to set your second alarm
time. (If you don’t want to set the second alarm, just continue to press SET button to access the third alarm setting screen.)

After pressing SET, it will go to the third alarm showing initial display '- -:A3' (to turn alarm ON press UP button to show '0:00').
To turn OFF, press DOWN button. Follow the instructions as above. After finishing setting the three alarms, press SET it will go
back to normal display. (If you don’t want to set the second alarm, just continue to press SET button to exit the alarm settings
and the clock will go back to normal display)
SOUND ACTIVATION FUNCTION & TIME DISPLAY ONLY INSTRUCTION
The sound sensitive function can be turned off so the time can display continuously without going off. But Having this function
turned on will save energy. The clock can also be set to display time only, without alternating between date and temperature.

To turn sound activation function ON, press the 'V/S' button. When clock displays 'on:Sd' , the sound activation function is ON.

Press the V/S button again for the clock to display '--:Sd', means this function is turned OFF.

Press and hold the V/S button for 3 seconds until hearing a “Beep” Sound, the Clock will display Time only. To turn back to a
alternative display of time, date and temperature, press and hold the V/S button until hearing an “Beep” sound.

The temperature can’t be changed when the clock is at the TIME DISPLAY ONLY setting mode.