Gin Pegasus 3, User Manual, Page: 32 / 52

a
Pegasus 3 user manual
aa
_______________________________________________________________________________________________________________________________
a
a
●
avoid large angles of attack and the possible early stall near the ground (release the
speed bar only slowly
}
Always make sure before attaching advertising to the glider that the adhesive planned will not
alter the glider’s fl ight behaviour. If you are in doubt, we recommend that you do not attach the
adhesive. Attaching adhesives to the glider which are large, heavy, or made of unsuitable
material may result in revocation of the certi fi cation.
}
The glider structure is put under high levels of strain in particular on extreme fl ight manoeuvres,
rapid descent methods (spiral dives) or prohibited aerobatic manoeuvres. They considerably
accelerate the aging process of the structure and should therefore be avoided.
The glider must be inspected earlier than is usually the case if it has been put under more than
the usual degree of strain.
}
In many cases, sand and salt air cause the lines and fabric to age much more rapidly. If you often
fl y near the sea, the glider should be inspected more frequently than normally required.
}
Temperatures under -10 °C and over +50°C can make the paraglider un fi t to fl y. The
manufacturer’s warranty will lapse if the glider is used outside of this temperature range.
}
ǧ
ǧ
ǧ
ǧ
Page 32
a