background image

26

WARNING: Always replace damaged lines. 
A damaged line can cause loss of control 
of the glider

For all other repairs and maintenance, please see your dealer or specialist repair shop.
Replacement lines can be ordered from your GIN dealer. Check replacement lines for length 

against its counterpart on the other side of the wing. Always perform a test inflation on flat 
ground to check everything is in order before flying.

Inspection period

A qualified professional should perform a formal maintenance inspection no later than 30 

months after the first flight or after 200 hours, whichever is sooner. Subsequent inspections 
should be carried out every 24 months or 200 hours, whichever comes sooner. Inspection should 
consist of measurements of the fabric porosity, tear resistance, line strengths, line lengths and a 
full visual check. The full protocol is available on our website.

If you groundhandle frequently or fly in harsh conditions, we recommend an annual check. It’s 

your responsibility as a pilot to ensure that your wing is airworthy at all times.

GIN lifetime guarantee

Gin Gliders are proud to guarantee the quality, craftsmanship and performance of all our 

products. Equipment with defects in materials or manufacturing will be repaired or replaced at 
the discretion of Gin Gliders for the practical lifetime of the product. Equipment damaged through 
wear and tear, misuse or neglect may be repaired at a nominal charge.

If you have any problems with your equipment, please contact your GIN dealer in the first 

instance, or Gin Gliders directly via our website.

Care of the environment

We are priviledged to fly in areas of outstanding natural beauty. Respect and preserve nature 

Summary of Contents for Carrera +



































Reviews: