background image

24

Care and maintenance

Appropriate care and maintenance is essential both for your safety in flight and to extend 

the life of your glider. Excessive wear is caused by careless groundhandling, packing or storage; 
exposure to excessive humidity, heat, salt or chemicals; and insects or small animals.

General care tips

Don’t groundhandle or take-off on abrasive surfaces.
To move the paraglider to another spot, don’t drag it across the ground. Pick it up and carry 

it.

Don’t repeatedly inflate the glider and allow it to crash back down. Step towards the wing as 

it comes down to take the force out of this action.

Don’t let the leading edge crash to the ground. This stresses the seams and can even cause 

the cell to explode.

Don’t step on the lines or the canopy, or allow others to do so.
Don’t open your wing in strong winds without first untangling the lines.
Don’t leave your glider out in direct sunlight longer than necessary.
Don’t sit on your rucksack when your glider is packed inside.
Don’t pack your glider with foreign objects inside. In particular, insects may bite through the 

fabric or produce acids when their bodies decompose.

Always rinse your glider immediately if it has been exposed to salt water (see “Cleaning”).

Packing instructions

Although the plastic rods used in the sail have been selected for their excellent recovery 

characteristics and in the worst case can be replaced, we recommend keeping them in their best 

Summary of Contents for Carrera +



































Reviews: