background image

25

IMPORTANT: Do not attempt to perform 
repairs unless you have the knowledge, 
experience, materials and tools needed 
to do the job properly.

condition by packing your glider concertina style.

Pack your glider so that the plastic rods lie as flat as possible on each another and there is no 

unnecessary bending or twisting of the rods. Fasten any straps or bands by pulling gently—do not 
overtighten. We recommend the use of the GIN concertina bag. Please ask your dealer for details 
or refer to our website.

Cleaning

Remove sand, dirt or small stones from inside the canopy. Use only lukewarm water and a 

sponge or soft cloth to clean your glider. Leave your glider to dry naturally in a well-ventilated 
area out of direct sunlight. Never use abrasive materials, solvents or detergents.

Storage

Always make sure your glider is completely dry before storage. Do not store your glider for a 

prolonged period if it is sandy, salty or if other objects have entered the cells. Store your glider 
in a dry place out of direct heat and away from chemicals or small animals. If you intend to store 
your glider for a long period, we recommend storing it loosely.

Inspections and repairs

The canopy, lines, risers and connections must be inspected before every flight for correct 

function and any signs of damage. If, at any time, your glider shows unusual changes in flying 
behaviour, have it checked by a qualified professional.

Small holes in the sail, which do not affect a seam, can be repaired with the sticky backed 

ripstop tape provided with your glider. Plastic rods can also be replaced by sliding the rod out of 
its pocket and inserting the replacement rod.

Summary of Contents for Carrera +



































Reviews: