Gin Gliders Genie Lite 2 L, Pilot'S Manual

Page: 16 / 37

16
Attaching the rescue deployment bag to the harness deployment handle
The rescue container for this harness comes with its own deployment handle. This handle and its strap
must be connected to the deployment bag of the parachute. In particular, check the length of the strap
connecting the rescue deployment handle to the rescue inner container. It should be long enough that the
reserve can be extracted without the danger of the pins not being pulled before the strap tightens on the
reserve, but not so long that there is excessive slack that extends the movement required for deployment.
The deployment bag of other manufacturers’ rescue systems (i.e. non-GIN rescue systems) may have
different loop positions which may cause a deployment failure. Be sure to contact your parachute dealer
or a qualified professional to check the connection, position and secure deployment, and refer to the
rescue manual for details.
Yeti Cross Inner bag
Handle attachment Pass the handle through the center loop Pass the handle through itself Pull to make a clean, tight knot
2 4 1 3
IMPORTANT: The deployment bag of other
manufacturers’ rescue systems may have
different loop positions which may cause a
deployment failure.
Notice: Later models of the Genie Lite2 are
supplied with the above inner container.