Insert the piece with adhesive into the piece shown, applying pressure.
2.1 Attach the interior angle to the angle.
2.2 Place the shown half of the thread clip in position.
2.3 Insert two clips into the profile groove as shown, with the same dimensions
in the two profiles, equivalent to the height of the window. And one in the
remaining profile.
2.4 Place the angles at both ends and attach them to the uneven profile, using 4
normal screws and 2 left-hand screws.
3.1 Position the lateral profiles, joining the previously assembled bottom profile
to the Stor box.
3.2 Attach the assembly using the left-hand screws. Screw them diagonally into
the angles.
3.3 Repeat the operation with the remaining screws.
Starting with side A
4.1 With the other half of the clip, clamp the thread
4.2 Place the clip perpendicular to the plane of the Stor. Rotate
and hold the clip as shown.
4.3 Repeat the same process on side B, tightening the thread.
1. Clip profiles
2. Bottom profile
3. Product assembly
4. Thread tension
Spring system
Componentes
Spring system
Spring system
Chain system
2x Clip thread
2x Interior
antgle
Screws
6x
8x
5x Clip frame
3xProfile frame
2x Angle
Product assembly
x2
x4
Phillips screwdriver
Gira a izquierda
1
2
5x
2x
3
4
x4
x4
Phillips screwdriver
2
1
4
3
A
A
1
1
3
3
2
2
4
4
B
B
Turn left
