6
ENGLISH
The product can be cold cleaned with a disinfectant and a sponge.
Before removing the lamp, it is necessary to make sure that the instrument is off for some
minutes to avoid the risk of burning.
To change the lamp
- Disconnect from electrical.
- Open the lamp cover-ring by pressing it (Fig. 1).
- Change the lamp by pulling it straight out (Fig. 2).
- Fit the new bulb by pressing it straight up into the lamp holder.
- Re-assemble the cover-ring (Fig. 1).
Disposal:
The product must not be disposed of along with other domestic waste. The users
must dispose of this equipment by bringing it to a specific recycling point for electric and
electronic equipment.
For further information on recycling points contact the local authorities, the local recycling
center or the shop where the product was purchased. If the equipment is not disposed of
correctly, fines or penalties may be applied in accordance with the national legislation and
regulations.
GIMA WARRANTY CONDITIONS
Congratulations for purchasing a GIMA product.
This product meets high qualitative standards both as regards the material and the production. The
warranty is valid for 12 months from the date of supply of GIMA.
During the period of validity of the warranty, GIMA will repair and/or replace free of charge all the defected
parts due to production reasons. Labor costs and personnel traveling expenses and packaging not
included.
All components subject to wear are not included in the warranty.
The repair or replacement performed during the warranty period shall not extend the warranty.
The warranty is void in the following cases: repairs performed by unauthorized personnel or with non-
original spare parts, defects caused by negligence or incorrect use.
GIMA cannot be held responsible for malfunctioning on electronic devices or software due to outside
agents such as: voltage changes, electro-magnetic fields, radio interferences, etc.
The warranty is void if the above regulations are not observed and if the serial code (if available) has
been removed, cancelled or changed.
The defected products must be returned only to the dealer the product was purchased from. Products
sent to GIMA will be rejected.
Summary of Contents for LUXIFLEX 30754
Page 2: ...2 Fig 1 Fig 2 ...
