26
4. OPERATION
4.1 Start Measurement
1. Open the clip as shown in Figure 3.
2. Put finger into the rubber cushions of the clip (make sure the finger is
in the correct position), and then clip the finger.
3. The device will power on automatically in 2 seconds, and start to dis-
play software version number.
4. Next enter into data display screen (as shown in Figure 4). The user
can read the values and view the waveform from display screen.
Figure 3 Put finger into the Oximeter
Figure 4 A1
Figure 4 A2
Figure 4 B1
Figure 4 B2
ENGLISH