—
10
—
When the leads state is "DROP", leads shown on the screen have been off .Please reconnect
them .
(4) Printing:
Under this conditions, press
to startup the printer’s printing-system information setting and
the ECG waveform; press
again to close down the printer.
ATTENTION:
When there is no paper in the paper cabinet, the instrument will indicate you to
install the paper when you press the
or the
button as followings. Press
button to
return after installing paper.
(5) Calibrating:
Press
button to print a lmv standard voltage mark in order to observe the current sensitivity
directly.
The LCD will display the following picture when in calibrating process:
In calibrating process:
Please Waiting…
English Interface
Ending the Calibrating:
English Interface
ATTENTION: The calibrating process is operated automatically without pressing any button,
and it will return after ending the calibrating.
(6) Waveform-freezing:
Press
to freeze the current ECG waveform displayed on the LCD in order to preview.
OVER