—
9
—
(1) Patient cabling indicator column:
Press the button
to choose the patient cabling indictor column, the guide arrow in the
column just turning (for example:
), then press the button
to choose the
corresponding patient cable, the instrument switches to the corresponding patient cable inspection.
The relevant patient cable No. just turn when choosing the patient cable. Press I II III aVR
aVL aVF Vl V2 V3 V4 V5 V6 to change the order.
(2) System state information column:
Press the button
to choose the patient cabling indictor column, the guide arrow in the
column just turning (for example:
), then press the button
to switch the relevant
information, this column is read-only. The state and other indicator information are all read-only.
Mode Conversion: shows the mode conversion of the systemic lead, it divides into Auto lead
conversion (AUTO) and Manual lead conversion (MANU).
Leading condition indication: it will show
‘
NORM
’
when the leads collecting signals
normally
,
and
‘
OVER
’
when the leads fall off or the collected signals too big and results in system
saturation.
(3) Leads state indication.
When the leads state is "NORM" , you can print the ECG.
When the leads state is "OVER", you can’t print the ECG, please check whether electrodes are
palced well.
When the leads state is "SAT", printed ECG is disordered,please check whether electrodes are
palced well.