6
ENGLISH
Brief
The Alternating Pressure Mattress consists of two parts: the mattress and the pump. The pump utilizes a
small compressor to remain quiet and energy efficient. The control panel is simple and very user friendly.
The mattress relieves pressure by sequentially deflating and inflating alternate air cells on
approximately
12
minutes timed intervals. It is widely recognized that constant pressure to a bony
prominence is the leading cause of skin breakdown. The continuous movement supplied by the unit
lessens the areas of constant pressure and enhances circulation.
Operation
1. Place the mattress on the bed frame with the hose end at the foot section of the bed frame.
2. Using the integrated hooks, securely hang the pump on the bed end at the foot end or place on a
smooth flat surface.
3. Connect the air hoses from the mattress to the pump.
4. Plug the pump into a wall outlet. Be sure the power cord is safely away from possible hazards.
5. Turn on the power switch on the control panel of the pump. The pump will begin to inflate the attress.
6. After inflation, adjust the mattress using the dial on the pump.
Caution
1.
Do not smoke on or near the pump.
2.
Keep the pump away from heated surfaces.
3.
Explosion risk if used in the presence of flammable anesthetics.
4.
Replace fuse as marked:
T
1A 250V.
Power Input:AC 230V 50/60Hz; 0.1A
Product Specifications
DIMENSIONS
MATTRESS (Length x Width x Height)
200cm×86cm×9.5cm
PUMP (Length x Width x Height)
26cm×13cm×10cm
WEIGHT OF PRODUCT
MATTRESS WEIGHT
4.5kg
PUMP WEIGHT
1.4 kg
WEIGHT CAPACITY
MAXIMUM PATIENT WEIGHT
1
35
kg
ELECTRICAL
OPERATING POWER
AC230V50/60Hz,0.1AMAX
FUSES
T
1A 250V
ENVIRONMENTAL CONDITIONS
OPERATING CONDITIONS
Ambient Temperature
1
0
°C to
40
°C
(50°F to 104°F)
Relative Humidity
10% to
7
5%
STORAGE AND SHIPPING CONDITIONS
Ambient Temperature
-18°C to +43°C
(0°F - 110°F)
Relative Humidity
10% to 95%
Summary of Contents for 28567
Page 23: ...WEEE BF ...
Page 24: ......