15
5 Foot switch jack
6 Battery cover
7 Mute selector switch
8 Data acquisition mode selector switch
9 Measuring tool resolution selector switch
10 Standard transfer connector
USE
1 lnsert (4) to PC USB port, the PC system will identify the transmission
device as “USB Composite Device” automatically in 10 seconds.
2 To acquire the data, insert connector (1) to measuring tools connector
using the adapter (10) if necessary.
3 Move switch (9) to the select the desired resolution: 0.01mm / 0.001mm -
0.0005in / 0.00005in
4 Move switch (8) to select the data acquisition mode (see point 8)
5
Open end user software
: any literal software which can be inputted
on keyboard (such as Excel, Word, TXT and etc.) can work.
6 To operate the measuring tool, press button (3) one time, the measured
data will be acquired to the above software where the cursor is. The cursor
will do as follows:
A.
Enter:
once acquired the data, if ENTER is pressed the cursor skip to
next line automatically, be equivalent to the computer Enter key;
B.
Tab:
once acquired the data, if TAB is pressed the cursor jump
automatically to the left or down to the next text input form, be equivalent
to the computer Tab key;
C.
Cursor:
once acquired the data, the cursor remains on that place,
waiting for the operator manually move the cursor to the location where
next measuring data have to be input. If the cursor is not moved new data
will be entered always in the same cell.
7 Tone / Mute mode selection, As the draft, open (6), move (7) to tone mode
or mute mode:
A.
Tone mode:
the status indicator (2) is on, when press DATA button and
acquire the data successfully, the device has “beep” tone;
B.
Mute mode:
after connect with the PC, the status indicator (2) is off,
when press DATA button and acquire the data successfully, the LED
indicator flash once.
ENGLISH