Giltrap WideTrac, Operations & Parts Manual

Page: 11 / 46

Page 11
WideTrac Operation & Parts Manual
Wheel Nut Recommended Torque Settings
M18 - 200 ft/lbs or 270Nm
M20 - 280 ft/lbs or 380Nm
Axle Mounting Bolt Recommended Torque Settings
M16 - 180 ft/lbs or 245Nm
M20 - 355 ft/lbs or 480Nm
Recommended Tyre Pressures
11.5/80-15.3 76psi 5.25 bar
400/60-15.5 65psi 4.5 bar
15/70-18 66psi 4.6 bar
385/65-22.5 (15Rx22.5) 79psi 5.5 bar
500/45-22.5 52psi 3.6 bar
500/60-22.5 40psi 2.8 bar
Pre-Service Guidelines & Settings
Prior to delivering your machine, your dealer should have completed a pre-delivery
check.
It is beneficial to check the following points before using the machine for the first time.

CHECK ALL WHEEL NUTS ARE SUFFICIENTLY TIGHT.

CHECK ALL TYRE PRESSURES ARE CORRECT.

CHECK ALL AXLE MOUNTING BOLTS AND NUTS ARE SUFFICIENTLY
TIGHT.

THE CONVEYOR BELT should be checked for correct tension, and adjusted if
necessary. See page 13 for information on conveyer belt adjustment.

THERE ARE SEVERAL GREASE POINTS on all machines. Check the yellow
label on the side of your machine to see how many grease points there are. You
should fully grease everything before running it for the first time. See page 14 for
lubrication details.