Gilson VERITY 1741, User Manual

Page: 57 / 60

51 FRonT PAnEl conTRol | USER’S GUIDE
F
R
O
n
T
p
A
n
e
L
C
O
n
TR
O
L
F
R
O
n
T
p
A
n
e
L
C
O
n
TR
O
L
deUTeRiUM LAMp (d2)
The following values are displayed:
Current Values of D2 (Deuterium Lamp) Control
NAME DESCRIPTION
VA3 Voltage at the output of the current regulator behind the measuring resistor (approx. +72 V).
VA4 Voltage at the output of the current regulator in front of the measuring resistor (approx. +82 V).
VA5 Voltage at the anode of the lamp (approx. +71 V).
IAD Anode lamp current (approx. +0.282 A).
VHT Heating voltage in steady state (approx. +1 V).
IHT Heating current (approx. +2 A).
TUnGSTen LAMp (W)
The following values are displayed:
Current Values of W (Tungsten Lamp) Control
NAME DESCRIPTION
VLO Current regulator Lo voltage (approx. +0.9 V).
VHI Current regulator Hi voltage (approx. +11.7 V).
VBL Lamp voltage (approx. +10.8 V).
IBL Lamp current (approx. +0.8 A).
Cooling
Shows temperature of illuminator TEMP - If the cooling sensor is not connected, the display will
show
TeMp: SenSOR nOT inSTALLed , rotation speed of fans FAn1 and FAn2 (rpm) and their
voltage (V).
Interface
Shows the status of the analog and digital Io InTERFAcE:
Status of digital inputs DIn1 and DIn2 and digital output DoUT1 and DoUT2.