Gilson macroman, User Manual

Page: 7 / 9

13 12
MACROMAN
TM
|
USER’S GUIDE TROUBLESHOOTING
|
MACROMAN
TM
A
C
CE
S
SO
R
IE
S &
S
PAR
E
P
ART
S
Return for Repair
If any problem persists, please return MACROMAN back to your local
Gilson representative.
Before returning any instrument to your local Gilson representative,
ensure that it is completely free of chemical, biological, or radioactive
contamination (Refer to Cleaning , page 11). Returned instruments can
only be checked and repaired if they have been carefully cleaned and
decontaminated by the customer.
Forced opening of the instrument invalidates any warranty claim. Enclose
with the returned instrument a description of the trouble that has
occurred and specify which reagents were used.
There are no user-serviceable parts inside of the unit.
Chapter 5
ACCESSORIES & SPARE PARTS
Accessories
DESCRIPTION PART NUMBER
Charging desk stand F107200
Wall-mount F107201
Magnetic wall-mount F107202
Filter, 0.22 µm, standard (set of 10) F107204
Filters, 0.22 µm, sterile (set of 10) F107205
Filter, 0.45 µm, standard (set of 10) F107206
Filters, 0.45 µm, sterile (set of 10) F107207
Spare Parts
DESCRIPTION PART NUMBER
Power supply F107203
Lithium-ion battery F107208
Nosepiece F107209
Adjustable Side Stand F107210
Pipette adaptor F107211
T
R
OU
B
LE
SHO
O
TI
NG
Chapter 4
TROUBLESHOOTING
The following table may help you to identify and correct the problem you might
encounter.
Troubleshooting Table
SYMPTOM POSSIBLE CAUSE ACTION
The serological pipette
falls out (the holding force
of the pipette is too small),
or tilts to the side too
much.
The pipette adaptor is dirty or
wet.
Take out the pipette
adaptor, clean and dry.
The pipette adaptor is damaged. Replace it with a new one.
The pump is working, but
MACROMAN does not
draw liquid or draws liquid
very slowly.
The filter is dirty.
Take out the pipette
adaptor, take out the filter,
if it is dirty, replace it with a
new one.
The pipette adaptor is damaged.
Replace pipette adaptor
with a new one.
The filter is blocked. Replace filter
.
The battery is low. Recharge the battery.
Liquid leaks from the
pipette (the aspiration
and the dispense buttons
are not pressed).
The serological pipette is
damaged or worn.
Check the serological
pipette for damage –
cracks, dents – if present,
replace the pipette with a
new one.
The serological pipette is
inserted incorrectly.
Check whether the
serological pipette has
been correctly inserted in
the pipette adaptor.
The pipette adaptor or the filter
is installed incorrectly.
Check wether all parts
are present and correctly
installed.
The pipette adaptor is
damaged.
Replace pipette adaptor
with a new one.
MACROMAN does not
charge.
MACROMAN is placed
incorrectly on the stand.
Check the fit of the
alignment of the
MACROMAN on the pins in
the stand.
The power supply is connected
incorrectly in the desk stand.
Remove then reinstall the
power supply in the desk
stand.
The power supply is fit
incorrectly in MACROMAN.
Remove then reinstall
the power supply in
MACROMAN.
CAUTION