background image

INTRO

D

U

C

TI

O

N

3

CENTRY™ 103 MINICENTRIFUGE

 

|

 

USER’S GUIDE

Chapter 1

INTRODUCTION

CENTRY™ 103 Minicentrifuge is an easy of use and portable benchtop device ideal for a 

quick separation of particles from a supernatant according to a density gradient.  

It also enables a spin down of a drop of liquid from the walls of tubes.
Equipped with robust and easy to change rotors, the CENTRY 103 Minicentrifuge can be 

used either with microtubes or tube-strips. The round rotor has a capacity of eight  

1.5 mL or 2.0 mL microtubes, and the rectangular shaped rotor capacity is two lines of 

eight connected 0.2 mL tube-strips. 
Due to its small footprint and a battery compartment, the CENTRY 103 Minicentrifuge 

can be used anywhere, from small benches to laminar flow cabinets, or even if there is no 

power supply available, the Minicentrifuge is convenient and easy to transport. 
To start or stop centrifugation, simply press down in the lid.  

The CENTRY 103 Minicentrifuge will automatically decelerate to a stop after six minutes of 

continuous spinning.

Ordering Information

DESCRIPTION 

PART NUMBER 

CENTRY™ 103 Minicentrifuge

F110736

Specifications 

ROTOR 8 TUBES  

1.5–2.0 mL (PN F1077310)

ROTOR 2 TUBE-STRIPS  

8 x 0.2 mL (PN F1077311)

Dimensions  

(W X D X H)

150 x 163 x 113 mm

Weight

600 g (excluding rotor and batteries)

Max. Capacity

8 microtubes: 
2.0 mL or 1.5 mL

2 PCR strips:
0.2 mL x 8 connected tubes

Speed

6 000 rpm (+/- 20%)

6 200 rpm (+/- 20%)

Relative Centrifugal 
Force (RCF)

1.310 ~ 2.960G (2.0 mL)
1.260 ~ 2.840G (1.5 mL)

Max. 1.200 ~ 2.690G
Min. 810 ~ 1.820G

Safety

Automatic stop after six minutes (fixed timer)
Lid opening interlocks brake
Overcurrent fuse and motor overcurrent detector  
(Motor locks when the rotor is unbalanced)

Power

AC adapter with five different plugs (1 SKU)
Input: 1-Phase AC 100-240V | 50/60Hz | 0.6A
Or four AA alkaline batteries

Autonomy with 

batteries (approx. 

indication)

 

about 170 cycles of  

10 seconds spinning

 

about 7 cycles of  

6 minutes spinning

 

about 500 cycles of  

10 seconds spinning

 

about 15 cycles of 6 minutes 

spinning

Warranty 

12 months

Summary of Contents for CENTRY 103 Minicentrifuge















Reviews: