Gill Instruments Ltd
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MetPak/MetPak RG and MetPak Pro
Page | 89
Issue 1
Doc. No. 1723-PS-0022
October 2018
8.4.
Safe Mode
If a unit is received that will not communicate or the configuration settings are not known then Safe
Mode can be used to establish communication with the MetPak and change configuration settings
(see Para 6.7).
8.5.
Bench Test
Carry out a bench test as follows:
Connect the MetPak unit to the host PC and power supply, using a known working test
cable.
Check for normal output data, and that the Status Code is OK – 00.
If the status code is other than 00, refer to above Table for a list of status (error) codes.
Use an office fan or similar to check that the unit is sensing wind, turning the unit to
simulate changing wind direction and to check that both axes are functioning.
Check for output changes in temperature and relative humidity sensor (the fan will also
cause small changes in these properties).
8.6.
Returning Units
If the unit has to be returned, it should be carefully packed in the original packaging and returned
to your authorised Gill distributor, with a full description of the fault condition.
|
http://www.gillinstruments.com/main/an_distributors.htm
}
8.7.
Guarantee
For terms of guarantee contact your supplier.
Warranty is void if the unit is damaged or broken.