7
EN
EN
1. Remove the 5-point harness.
2. Take off the cover from the backrest and base.
3. Move the headrest of the child seat up to the
highest position.
4. First take the cover off the base of the headrest,
then remove the cover of the headrest.
To re-fit the cover, simply follow the above steps in
reverse.
CAUTION!
Never use the child seat without a correctly
installed buckle. Make sure that the metal plate is
correctly attached.
CAUTION!
Check that the harness straps are not
twisted and that they have been correctly inserted in
the belt slots of the cover.
This child safety car seat can be adjusted to
3 positions.
Before fixing a child in the child restraint system,
the seat must be set on the recline position for
rear-facing use,lying level (see picture
④
) ,
9-18KG use third level ,15-36KG use second
level(see picture
②③
).Rotation on the third level
then change to lying level. To achieve this, use
the recline handle located in front of the child
restraint system between the seat and the base
to adjust it to the desired position.
Remove the fabric cover
Adjust the recline angle of the seat
