10
EN
EN
A correctly adjusted headrest ensures that the diagonal seat belt section
is optimally positioned, and gives your child optimal protection. The
headrest must be adjusted so that there is a space two fingers wide
between the headrest and your child's shoulders.
Adjust the height of the headrest to fit your child.
Pull the headrest height adjuster and headrest at the same time.
This unlocks the headrest.
You can now move the unlocked headrest to the desired height. As soon as
you release the adjuster, the headrest will lock into place.
Place the child seat on the vehicle seat.
Have your child sit down in the child seat and check the height. Repeat this
process until the headrest is at the optimal height. If in the lowest position
the headrest is still too high, additional adjustments can be made using the
shoulder strap height adjuster, as explained in section “ADJUST THE
HEIGHT OF THE HARNESS”.
I
NSTRUCTIONS
Group 0 + (0-13 kg )
Installed in the rearward facing position with vehicle seatbelt or
ISOFIX system
Installed in the rearward facing position with vehicle seatbelt and
5-point harness
Pull the vehicle seatbelt and pass the lap belt section through the red belt
guidance and under the sleeping cushion.
Pass the diagonal seat belt section through the blue guidance on the back
of the child seat.
Fasten the seat belt and pull it tight, ensuring that the seat belt is not twisted.
In vehicle belt installation
NOTE:
For children of this size, the child seat must only be installed in the rearward
facing position and at a maximum angle of inclination (lying level). To make
sure that the car seat has been installed correctly, please shake it before
use.
