GILES GBF-70, Operation & Service Manual

Page: 45 / 108

33
Fryer Operation
GBF-70 Fryer
4.01.3 Setting the Cooking Temperature
Press the
[TEMP] key
Use keypad to enter cooking temperature
setpoint (
°
F). Ex: 325 = 325
°
F
Press the [START] key to save setpoint.
NOTE:
Pressing the [TEMP] key twice (2x) will display actual oil temperature for 20 seconds .
Default unit for Temperature is [
°
F] ... can be changed in User Settings ( Section 4.01.8) .
Cooking temperature setpoint must be input manually, as menu Item presets do not include temperature settings .
Instruction prompts will be shown on the Upper Display to help guide you through the process.
DO NOT place Heat Switch in the [HEAT] position unless vat is filled with cooking oil to the
[FULL] level.
• If actual oil temperature is lower than the entered setpoint, controller enters PREHEAT phase (small red HEAT
indicator beside the Lower Display turns ON ) . Before oil will actually begin heating, the Heat Switch on the
control panel must be placed in the [HEAT] position . The amber HEAT indicator on control panel will turn ON and
oil begins heating.
• If the oil temperature is already equal to or greater than the entered setpoint, an alarm sounds and the message
“SETPOINT REACHED” is displayed. Press the [ALARM] key to enter READY state. Fryer is ready for cooking.
While heating, real
‐ time actual oil temperature is shown on the Lower Display . After reaching setpoint, display
changes to show the setpoint temperature .