GILES FSH-6, Operation & Service Manual

Page: 49 / 68

39
Model: FSH − 6 Operation & Filter Maintenance
③
SNOOZE Button
In the event that [TIMEOUT] occurred during an inopportune time, or while
cooking is in progress, pressing the [SNOOZE] button will temporarily reset
the timer to [WARNING] mode for a period of two (2) hours .
Snooze can only be used twice . During a second period, the [CHANGE SOON] light flashes to indicate
final snooze period. After using the second snooze period, the alarm condition will exist until the EAC
collector cells are cleaned
(or exchanged with clean) and the timer automatically resets.
①
CHANGE SOON
The amber indicator light turns ON when timer enters [WARNING] mode ... no audible alarm will sound at
this time. If collector cells are cleaned (or exchanged with clean) within the next 24 hours , the timer will
automatically reset and start a new countdown.
②
CHANGE NOW
If no action is taken within the allowed time, the timer enters [TIMEOUT] mode, the red indicator light
turns ON and an audible alarm sounds to signal that allowed time between
cleanings has expired. The alarm condition will continue until cleaning
activities are performed, or the
[SNOOZE] button is pressed, see #3 below .
Placing the hood POWER switch in the [OFF] position will silence the alarm
... but it will sound again & hood will not start if switch is returned to [ON] ,
unless cleaning (or exchange) has been completed.
Timer Operation:
1
2
3
4.04.3 E.A.C. Collector Cell Cleaning Timer − continued
Typically, pre ­ filters should be replaced weekly (see Sections 4.02.4 & 4.02.5 ) . They CANNOT be cleaned and are
not intended for long ­ term use.
Use
GILES replacement Item No. 91707. Write the replacement date on new filter.
4.04.4 Pre − Filter Maintenance
Pre ­ Filters are single ­ use, disposable fiber filters. NEVER attempt to clean and reuse these
filters ... doing so can cause damage to the unit.
IMPORTANT: Failure to use Giles OEM parts and OEM replacement filters may void the factory warranty.