19
Model: FSH
−
6
Overview
3.01
Control Panel
Item
Description
Function
1
Light Switch
Controls under
hood lighting.
2
POWER Switch
“PUSH
TO
START”
Press and momentarily hold the top
[START]
portion of switch to start
hood and provide power to cooking appliances. Release & switch remains
in the
[ON]
position (center). To turn hood OFF & shutdown power to
appliances, press the bottom of switch. Hood must be restarted with
switch after any power interruption.
3
E.A.C. Filter Status
Indicators
ON
WASH
CHECK
LED lights indicate the status of the Electronic Air Cleaner (E.A.C.) on each
side of the hood.
[ON]
Turns ON when hood is powered. Indicates that the E.A.C.
system is powered and functioning normally to clean the air.
Should be only light is ON during normal operation.
[WASH]
Indicates either excessive grease build
up on collector fins
(dirty), collector cell not in place, poor contact, missing ionizer
wires, etc. Approx. 2 minutes after this light turns ON, a beeping
tone alarm will begin sounding and power to cooking appliances will
be shutdown.
IMPORTANT!
Do not rely on this indicator as a signal for
routine cleaning ... cell must be cleaned daily to maintain peak
performance & extend the useful life of charcoal filters.
[CHECK]
Indicates that collector cell has stopped operating properly ...
either damaged & shorted to ground, fins are shorted due to excessive
moisture, etc. No alarm sounds & the appliances remain powered, but air
leaning system is not functioning.
DO NOT continue operation ... check
system & determine cause
.
4
CLOGGED FILTER
Light
Turns ON if a filter
(baffle, pre
‐
filter, or charcoal filter}
is excessively dirty
and restricting airflow through hood. Other obstructions, such as blocked
exhaust, may also be present. A constant (steady) alarm will sound.
5
FILTER MISSING
Light
Turns ON to indicated that a required filter
(baffle, pre
‐
filter, charcoal)
is
missing or installed improperly. No alarm sounds.
6
APPLIANCE POWERED
Light
Turns ON to indicate that power is being supplied to cooking appliances
under the hood. When light turns OFF while the hood is powered, there is
typically a an alarm condition that has disabled appliance power.
7
HOOD POWERED
Light
Turns ON indicating the hood is powered.
8
E.A.C. Cleaning Timer
CHANGE SOON
CHANGE NOW
SNOOZE
Cleaning
reminder system
that helps user properly maintain the electronic
air cleaner (E.A.C.) collector cells for optimum performance.
[CHANGE SOON]
Turns ON when timer enters
[WARNING]
mode,
indicating that the collector cells must be cleaned within the next
24
hours
.
[CHANGE NOW]
Turns ON when timer enters
[TIMEOUT]
mode,
indicating that the maximum time between cleanings has expired. Cells
must be cleaned immediately. A constant tone alarm sounds and will
remain ON until cleaning is performed ... timer resets automatically after
cleaning is performed.
[SNOOZE]
After entering
[TIMEOUT]
mode, pressing this button
temporarily returns timer to
[WARNING]
mode and silences alarm for
two
(2) hours
... only two (2)
[SNOOZE]
periods can be used.
Summary of Contents for FSH-6
