GILES FSH-6, Operation & Service Manual

Page: 35 / 68

25
Model: FSH − 6 Operation & Filter Maintenance
1. Press & momentarily hold the top [START] portion of the POWER switch ① until the hood blower starts running.
Release & switch springs back & remain ON. Green HOOD POWERED light ② should turn ON.
2
.
An alarm may sound briefly until the hood blower reaches full speed, then the amber APPLIANCE POWERED
light ③ should turn ON. Cooking appliances under the hood should now be receiving power and ready for use.
3. Both E.A.C. FILTER [ON] lights ④ should turn ON.
4. Place LIGHT switch ⑤ in the [ON] position to turn on the under ­ hood lighting.
Be sure that all filters are in place and access doors are closed and latched securely before attempting to start the
hood.
The hood will NOT power ‐ up if either access door is open, or ajar.
4. Operation & Filter Maintenance
4.01 Starting the Hood
4
5
4.02 Filter System − Maintenance & Alarms
4.02.1 Ventless Hood Filter Table
Filter
When to
Clean/Replace
How to Remove How to Clean How to Install
Baffle Filter Clean daily Section 4.02.2 Section 4.04.1 Section 4.02.3
Pre ­ Filter
Replace every 7 to 10
days
Section 4.02.4
DO NOT attempt to
clean; ONLY replace!
Section 4.03.4
Section 4.02.5
E.A.C. Collector Cell Clean daily Section 4.02.6 Section 4.04.2 Section 4.02.7
Charcoal Filter
Replace every 30 to 40
days,
Section 4.02.8
DO NOT attempt to
clean; ONLY replace!
Section 4.03.5
Section 4.02.9
To Start the Hood:
1. Press the bottom [OFF] portion of the POWER switch ① .
2 Blower stops and all indicator lights should turn OFF.
3. Power to the cooking appliances is shutdown.
To Shutdown the Hood:
1
2
3