GILES EOF-14/FFLT, Operation & Service Manual

Page: 17 / 98

7
Installation Model: EOF-14/FFLT & EOF-14/FFLT/14
2-03. Electrical Requirements
Table 2-03. Electrical Requirements (Continued on next page)
Model
Volt-
age
Phase Watts
AMPS
Breaker
Required
L1 L2 L3
All models
require a sepa-
rate circuit for
the heat lamps
120 1 500 15
5 --- ---
208 1 18,000 100 87 87 ---
EOF-14/FFLT
208
3 18,000 80 61 41 61
EOF-14/FFLT 240 1 18,000 100 75 75 ---
EOF-14/FFLT/14
(Requires (2)
circuits)
208 1 18,000 100 87 87 ---
Hz
60
60
60
60
60
EOF-14/FFLT 240 3 18,000 70 53 36 53
EOF-14/FFLT 480 3 18,000 35 27 18 27
60
60
EOF-14/FFLT
EOF-14/FFLT/14
(Requires (2)
circuits)
208
3 18,000 70
61 41 61
60
EOF-14/FFLT/14
(Requires (2)
circuits)
240
1 18,000 100
87 87 ---
60
•
Fryers must be adequately and properly grounded. Improper grounding may result in electrical
shock. Always refer to your local electrical code to ensure proper grounding of this or any other
electrical equipment. Always consult with an electrician or other qualified service person to
ensure breakers and wiring are of sufficient rating and gauge for the equipment being operated.
•
The units are available from the factory in the voltages and phase characteristics listed below. Check the
rating plate on the rear of the fryer to determine the correct power supply.
!
CAUTION