Gilera Fuoco 500, Service Station Manual

Page: 267 / 396

Unscrew the two pad pin screws, remove the pads
with the spring.
When refitting, tighten the two screws to the pre-
scribed torque and use Threadlock.
When refitting, adjust the cable properly so that the
switch is pushed when the system is unlocked.
Refit the spring/toothed sector unit, hold the crank-
case in a perfectly horizontal and stable position,
place the spring/toothed sector unit keeping it per-
fectly perpendicular to the bearing already fitted on
the crankcase; if necessary, slightly hit the unit
shaft end with a mallet and protect the thread by
screwing in a nut.
Fuoco 500 i.e.
Suspensions
SUSP - 21