GILANI ENGINEERING DY01112, User Manual

Page: 8 / 13

- 8 -
Figure 4
5.
Remove the screw below the left handrail as shown in Figure 5-1 (left) (the screw is the
front one of the left handrail), and reinstall the screw to the position below the right handrail
corresponding to the position in the left side. Re-tighten the screws by replacing the removed the
controller holder with the screw hole under the left armrest.
Figure 5-1
Pull out the controller cable on the right side and reel the cable from the bottom of the wheelchair to
the left side (Figure 5-2).
Figure 5-2
Ⅳ Using Introduction
1.Electric Wheelchair Operation
1)After the user is well seated, turn on the power switch of the controller, and the wheelchair will be
turned on after a prompt alarm. The LCD displays the current power and remaining mileage. The
system sets the safe starting strategy. Please release the joystick when tunr on the electric
whheelchair,otherwise, the system will be faulty and no working
.
2)The speed is adjusted by the button on the controller. There are five gears in total. It is suitable to
use low speed when starting. The real-time speed can be displayed during the driving. At the same
time, the gear position cannot be changed during the driving. The first time users recommend low
speed driving; an accident occurred due to unskilled operation.
3)It is easily and freely to use the electric wheelchair,pull the handle to start slowly, the wheelchair
keeps the same position according to the joystick forwarding position,left,right,forward and
backward.
4)If you need alarm, press the button marked with the horn symbol on the controller.
5)When the battery is fully charged, it displays 5 grids. When the battery is low, the grid is zero or
the battery icon flashes. It is recommended that when the remaining battery power is insufficient,
please charge it in time to keep the battery fully charged.
6)Press down the power switch for a long time, and turn off the wheelchair after a prompt alarm.
2.Controller Function Description