Gigaset T300 PRO Administrator'S Manual Download

Page: 61 / 94

Server

Gigaset T300 PRO / Gigaset T500 PRO / EN Master / A31008-M2212-R102-1y-7619 / admin_administration.fm / 02.12.2010

rsion 2, 06.0

.2010

Network adapter

This is an overview of the server network card(s) and their DHCP settings.

If the

Protocol

setting is set as

static

, you can enter the IP address and subnet mask man-

ually.

Mail server

Gigaset T300 PRO / Gigaset T500 PRO sends voicemails, faxes, backup files, backup
reports and other system messages (e.g., changes to user data by administrators) via e-
mail to users using an integrated SMTP server.

You can specify an alternative

Sender Email Address

. This is shown as sender (as "From"

and "Return path" in the mail header) once the message is sent. The recipient of system
e-mails can thus reply to an existing address.

Summary of Contents for T300 PRO































































































Search results

Summary of Contents for T300 PRO

Reviews:

Related manuals for T300 PRO

Brands by name

Popular brands

Gigaset T300 PRO, Administrator'S Manual

Search results

Summary of Contents for T300 PRO

Reviews:

Related manuals for T300 PRO

Brands by name

Popular brands