10
First steps
Gigaset SL610H PRO / GBR / A31008-M2352-R101-2-PG43 / starting.fm / 24.08.2012
V
e
rsion 4,1, 21
.11.2007
Initial charging and discharging of the battery
The correct charge status can only be displayed once the battery is first fully
charged
and
discharged.
¤
Charge the handset in the charger for
3 hours
.
¤
After charging, remove the handset from the charger and only replace it when
the battery is
fully discharged
.
Registering the handset
Your Gigaset handset can be registered on up to four bases. You must register the
handset on both the handset (
1
) and the base (
2
).
Once the registration process has been completed successfully, the handset returns
to idle status. The handset's internal number is shown in the display, e.g.,
INT 1
. If
not, repeat the procedure.
Please note
Only place the handset in the designated charger.
3hours
Please note
u
After the initial battery charge
and
discharge, you may place your handset in
the base after every call.
u
Always repeat the charging and discharging procedure if you remove the
battery from the handset and reinsert them.
u
The battery may warm up during charging. This is not dangerous.
u
After a while, the charge capacity of the battery will decrease for technical
reasons.