Te
mplat
e
M
odu
le
, V
e
rs
ion 1.
2,
1
1
.09.
20
18,
Configuring other settings with the Web configurator
Gigaset Maxwell 4 / LUG IE-UK-International en / A31008-N4005-R101-1-7619 / web_configurator.fm / 5/19/19
44
Telephony
Changing the standard send connection
If the telephone has more than one VoIP connection, outgoing calls are initiated via the standard
send connection ( page 16).
Changing the standard send connection:
¤
Settings
Telephony
Connections
All the configured connections are shown. The check box
under
Default send Connection
shows which connection is currently selected.
¤
Check the connection required
Set
Only active connections can be selected.
Settings for Call Waiting
Specify the telephone's response when another call comes in during a call.
¤
Settings
Telephony
Call Settings
For each connection:
Prevent/permit Call Waiting:
¤
Select the option under
Display Waiting Call
(
= Call Waiting permitted) /
deselect (
= Call Waiting not permitted)
Permit Call Waiting:
¤
Select
Acoustic signal
from the list
Off
: the incoming call is shown in the display only
or signalling with a Call Waiting tone (beep): once or every 4, 10, or 20 seconds
Save the settings:
Set
Setting up Call Divert
Forwarding incoming calls to another number or a network mailbox.
¤
Settings
Telephony
Call Divert
For each connection (
Incoming line
):
The provider/the PABX supports this function.
All Calls
Forward all incoming calls.
When Busy
Forward incoming calls when the line is busy.
No Answer
Forward incoming calls after a defined period if they are not accepted.
