Gigaset Gigasrt S 88 User Manual And Safety Precautions Download Page 38

Page: 38 / 63

Press keys:

Handset Operation

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619

mobilt_an.fm

25.09.03

Changing the Name of a Handset

The names INT 1, INT 2, and so on are assigned auto-

matically. However, you can change these names, for

example, to ANNE or OFFICE (10 characters maxi-

mum).

Press left on the navi key (INT) and the list of handsets

is displayed.

E D

Scroll to the desired handset

Edit

Press Edit.

Enter the new name.

Save

Press Save.

Changing a Handset's Intercom Number

You can change the number of a handset.

Press left on the navi key (INT) and the list of handsets

is displayed.

Press Menu.

åååååååååååååååååååååååååååååååå

Assign Number

[

Scroll to Assign Number and press OK. All registered

handsets are displayed.

E D

Select the desired handset

Enter an available intercom number.
If necessary:

E D

Scroll to a different intercom and change it first.

[

Press OK to save changes.

Intercom

Intercom Call
INT <
Eric

Four handsets are

registered already.
“Intercom Call” is

only displayed if

more than one user

is registered.

If the selected intercom telephone number has

already been assigned to a different handset, you

will hear an error tone (descending tone se-

quence).

Summary of Contents for Gigasrt S 88






























































Search results

Summary of Contents for Gigasrt S 88

Reviews:

Related manuals for Gigasrt S 88

Brands by name

Popular brands

Gigaset Gigasrt S 88, User Manual And Safety Precautions

Search results

Summary of Contents for Gigasrt S 88

Reviews:

Related manuals for Gigasrt S 88

Brands by name

Popular brands