Gigaset Gigasrt S 88 User Manual And Safety Precautions Download Page 47

Page: 47 / 63

Press keys:

Customizing Handset Settings

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619

mobilt.fm

25.09.03

Ringer Volume and Melody

u can choose from a number of

options

●

Five ringer volumes (the factory setting is volume 2)

●

“Crescendo” ring (increasing volume)

●

Ringer off

●

Any of

ten ringer

melodies

Press Menu.

åååååååååååååååååååååååååååååååå

Sound Settings

[

Scroll to Sound Settings and press OK.

åååååååååååååååååååååååååååååååå

Set Ring Tone

[

Scroll to Set Ring Tone and press OK – You will hear the

current

ringer volume

and its level will be displayed.

F G

Press left or right on the navi key to turn the volume of

the ringer up or down.

Scroll down one line.

F G

Press left or right on the navi key to chose the ringer

melody.

Save

Press Save

Setting the Time for Ringer Volume

You can set a different ringer volume for a certain peri-

ods of time (e.g. lower volume at night time).

Press Menu.

åååååååååååååååååååååååååååååååå

Sound Settings

[

Scroll to Sound Settings and press OK.

åååååååååååååååååååååååååååååååå

Set Ring Tone

[

Scroll to Set Ring Tone and press OK – You will hear the

current ringer volume and its level will be displayed.

Nite Sv

Press Nite Sv.

F G

Press left or right on the navi key to turn the time con-

trol on or off.

Scroll down one line.

----------time control---------
Nite Sv

Status: <On>

From: 06:00

Until:

08:00 AM

Status ON or OFF
Period
Ringer volume

Summary of Contents for Gigasrt S 88






























































Search results

Summary of Contents for Gigasrt S 88

Reviews:

Related manuals for Gigasrt S 88

Brands by name

Popular brands

Gigaset Gigasrt S 88, User Manual And Safety Precautions

Search results

Summary of Contents for Gigasrt S 88

Reviews:

Related manuals for Gigasrt S 88

Brands by name

Popular brands