Gigaset Gigaset SX761 dsl Manual Download

Page: 104 / 118

104

Glossary

Gigaset SX761 dsl / eng / A31008-M707-R111-2x-7619 / glossary.fm / 06.10.2008

Schabl

one 2

005_0

7_2

Dynamic IP address

A dynamic

IP address

is assigned to a network component automatically by

DHCP

. This

means that the IP address of a network component can change with every login or at

certain intervals.
See also:

Static IP address

DynDNS

Dynamic DNS
The assignment of

Domain names

and

IP addresses

is handled by the Domain Name

Service (

DNS

). This service is now enhanced with so-called Dynamic DNS (DynDNS) for

Dynamic IP addresses

. This enables the use of a network component with a dynamic IP

address as a

Server

on the Internet. DynDNS ensures that a service can always be

addressed on the

Internet

under the same domain name regardless of the current IP

address.

Ethernet

Ethernet is a network technology for local networks (

LANs

) defined by the

IEEE

as stand-

ard IEEE 802.3. Ethernet uses a base-band cable with a transfer rate of 10 or 100

Mbps

or 1 Gbps.

File Server

See

Server

Firewall

Firewalls are used by network operators as protection against unauthorised external

access. This involves a whole bundle of hardware and software actions and technologies

that monitor and control the data flow between the private network to be protected and

an unprotected network such as the

Internet

Summary of Contents for Gigaset SX761 dsl























































































































Search results

Summary of Contents for Gigaset SX761 dsl

Reviews:

Related manuals for Gigaset SX761 dsl

Brands by name

Popular brands

Gigaset Gigaset SX761 dsl, Manual

Search results

Summary of Contents for Gigaset SX761 dsl

Reviews:

Related manuals for Gigaset SX761 dsl

Brands by name

Popular brands