3
User manual Athens/China C360,C365 English
Step 2: Setting up the handset
Fitting the battery pack
◆
Insert the plug into the socket as shown in the
enlarged view.
◆
Insert the battery pack.
◆
Place the cords in the cord routing.
Closing the battery cover
Insert the cover into the top end of the battery
compartment and press down until it clicks into
place.
Opening the battery cover
Place your fingernail between the cover and the
housing and pull the cover upwards.
Step 3: Registering the handset to
the base station and charging the
battery pack
Precondition:
The handset is not already regis-
tered to a base station.
Registering the handset to the Gigaset C360/C365
base station occurs
automatically
. Place the hand-
set in the charging cradle of the base station with
its
display facing forward
. You will hear a confir-
mation tone. Leave the handset in the base station
until it is registered.
Automatic registration can take up to 5 minutes.
While this is happening,
Registering
flashes in the
screen. The handset is assigned the lowest unas-
signed internal number (1–4). If several handsets
are registered to the base station, the internal
number is shown in the top left of the display after
registration, e.g.
2
. If the internal numbers 1 to 4
have already been assigned (four handsets have
already been registered), handset number four is
de-registered and overwritten.
Charging the battery pack
leave the handset in the base station for approx.
13 hours for the Gigaset C360 or approx. 6 hours
for the . The battery pack is now fully charged. The
charge status of the battery pack is correctly dis-
played only after uninterrupted charging/discharg-
ing. Therefore you should not interrupt the charg-
ing procedure.
Charging is electronically controlled to prevent the
battery pack from overcharging. The battery pack
heats up during charging. This is normal and not
dangerous. After a time its charge capacity will
decrease for technical reasons.
You must set the date and time to ensure that the
times of calls are logged correctly (see Menu tree,
page 10).
Once the phone is registered and the time set, the
idle display looks as shown on page 1.
Note:
The display is protected by a plastic film.
Please remove the protective film!
◆
Place the battery leads in the cable guides so
that the battery cover cannot catch on the leads
and damage them when it is closed.
◆
Use only the rechargeable
battery pack
rec-
ommended by Siemens (page 9), i.e. never use
a conventional (non-rechargeable) battery pack
as this may cause significant damage to health
and property. For example, the outer casing of the
battery pack could be destroyed or the battery
pack could explode. The phone could also mal-
function or be damaged as a result of using batter-
ies that are not of the recommended type.
◆
Never use non-Siemens battery chargers as
this could damage the battery pack.
◆
Only place the handset in the charging cradle
that is intended for it.
