Gigaset DE900 IP Pro User Manual Download Page 144

Page: 144 / 233

144

Configuring phone settings via the Web configurator

Gigaset DE900 IP PRO / en / A31008-M2210-R101-4-7619 / web_configurator.fm / 05.09.2012

PRO V

rsion 3, 30

5.2012

Secure Real Time Protocol (SRTP)

The Secure Real-Time Transport Protocol (SRTP) allows you to encrypt voice data transmitted
using the Real-Time Transport Protocol (RTP).

Activate or deactivate the

Secure Real Time Protocol (SRTP)

Select whether you want to

Accept Non-SRTP Call

or not. If this function is activated, you

also accept incoming calls from a number that does not use SRTP.

In the

Pre-Shared Key for SRTP

field, enter the password for the encryption/authentica-

tion via SRTP.

Saving settings

Click on

Save

to save your settings on the

Security Settings

screen.

USB mode and data transfer

You can connect a USB storage device, e.g., a USB stick, to the phone. The USB memory can
be used in two ways.

For Gigaset MobileOFFICE™

As a memory extension

For further information, please refer to the section

Using a USB connection

page 116

On this screen you set the USB mode and transfer data from the USB stick to the phone and
vice versa.

Settings

Network and Connections

USB Mode and Data Transfer

Deregistering the USB stick from the phone

To prevent loss of data, you should deregister the USB stick from the device before removing
it from the device.

Click on

next to

Deregister USB stick

You can now remove the USB stick.

Using a USB stick for Gigaset Mobile Office

Activate Mobile Office Mode

You must activate the function before you can use Gigaset Mobile Office. The function is not
activated by default.

Summary of Contents for DE900 IP Pro










































































































































































































































Search results

Summary of Contents for DE900 IP Pro

Reviews:

Related manuals for DE900 IP Pro

Brands by name

Popular brands

Gigaset DE900 IP Pro, User Manual

Search results

Summary of Contents for DE900 IP Pro

Reviews:

Related manuals for DE900 IP Pro

Brands by name

Popular brands