Home
/
Gigaset
/
DE900 IP Pro
/
User Manual

Gigaset DE900 IP Pro, User Manual, Page: 116 / 233

Share

Page: 116 / 233

Gigaset DE900 IP Pro User Manual Download Page 116

116

Using a USB connection

Gigaset DE900 IP PRO / en / A31008-M2210-R101-4-7619 / resources.fm / 05.09.2012

PRO V

e

rsion 3, 30

.0

5.2012

Using a USB connection

You can connect a USB stick with a maximum storage capacity of 16 GB to the telephone.

u

As a memory extension for the resource directory: additional capacity for personal data,
e.g., ringers, pictures, call records, directory entries (vCards) and for data backup.

u

For Gigaset MobileOffice™: To personalise your phone with personal settings and data
including VoIP accounts, network settings, ringer settings and display settings etc. that are
saved on the stick.

Select the mode in which the USB storage device is to be used via the Web configurator
(

As soon as you plug a USB stick into the device, the data stored on it is automatically available
on the phone. The display shows the

Ý

icon.

Connecting a USB device

The USB port can be found on the left-hand side of the device.

¤

Connect the USB stick to the USB port on the device.

«
...
114
115
116
117
118
...
»

Summary of Contents for DE900 IP Pro










































































































































































































































Reviews:

No comments