34
Gigaset C620-C620A / LUG - UK-IE / A31008-M2403-L101-1-7619 / settings.fm / 4/29/13
Te
mplat
e
B
o
rn
eo
, V
e
rs
ion 1
, 21.
06
.2
012
ECO DECT
2) Deactivating DECT wireless module in idle status (Eco Mode+)
With the
No Radiation
setting, you can deactivate the transmission power of the base
completely during idle status.
v
¤
Ï
¤
OK
¤
q
ECO DECT
¤
OK
¤
q
No Radiation
¤
Change
(
³
= activated)
When the wireless model
is deactivated, the icon
¼
is displayed in idle status instead of the
signal strength icon.
This setting cannot be used with a repeater (
If the left or right display key is assigned to the
Status
function (Factory settings, Assigning
page 31), the ECO DECT functions can be activated/deactivated quickly:
¤
Press the Display key
Status
.
¤
q
Maximum Range / No Radiation
¤
Change
(
³
= activated)
Notes
u
To enjoy the benefits of the
No Radiation
setting, all registered handsets must support
this feature.
u
When the
No Radiation
setting is activated and a handset is registered to the base that
does not support this feature,
No Radiation
will automatically be deactivated. As soon as
this handset is de-registered,
No Radiation
will automatically be re-activated.
u
The wireless connection will only be established for an incoming or outgoing call and the
connection will be delayed by about 2 seconds.
u
So that a handset can establish a wireless connection with the base more quickly for an
incoming call, it must "listen" to the base more often, i.e. scan the environment. This
increases power usage and reduces the standby and talktime duration of the handset.
u
When
No Radiation
is activated, there will be no range display/range alarm on the
handset. Contactability can be tested by assigning a line: Press and hold the Answer call
key
c
. You will hear the ringing tone.
