82
Using the network mailbox
Gigaset A510IP / USA en / A31008-M2230-R301-2-6019 / Net-AB.fm / 09.10.2012
V
e
rsion 4, 16.0
9
.2005
Configuring a network mailbox for fast access
With fast access you can dial a network mailbox directly.
Assigning key 1, changing assignment
Fast access settings are handset-specific. You can assign a different network mail-
box to key
1
on each registered handset.
No network mailbox is preconfigured for fast access in the default settings.
1
Press and
hold
key
1
.
Or:
§Menu§
¤
Ì
Voice Mail
¤
Set Key 1
The list of VoIP connections and the fixed line connection assigned to the handset
as receive connections is displayed.
Net AM : Phone
is displayed for the fixed line
and
Net AM : IP1
to
Net AM : IP6
for
the VoIP connections.
s
Select entry and press
§OK§
(
³
= on).
If a number is already stored for this network mailbox, fast access is activated
immediately.
a
Press and
hold
the end call key (idle status).
If no number is saved for the network mailbox, you are asked to enter the number
of the network mailbox.
~
Enter the number for the network mailbox.
§OK§
Press the display key.
a
Press and
hold
the end call key (idle status).
Fast access is activated.
Calling the network mailbox via fast access
1
Press and
hold
.
If you have set a network mailbox for fast access, you are connected directly to this
network mailbox. Handsfree mode is activated.
d
If necessary, deactivate handsfree mode.
You hear the network mailbox announcement.
Displaying new messages in the handset's idle display
If a new message is present on one of the network mailboxes assigned to the hand-
set via its receive connection, the
Ã
icon and the number of new messages are
generally shown on the idle display.
Calling the network mailbox
With the message key
f
Under the message key
f
you will find a list for each network mailbox that fulfils
the following prerequisites:
u
The corresponding connections are assigned to the handset as receive connec-
tions.
