Gigafast EE2400-G, User Manual

Page: 8 / 30

Installing the Switch in a Rack
To mount the switch in a standard 19-inch equipment rack, you need these
tools and materials:
▪ Two mounting brackets supplied from the Rack Mount Kit
▪ Eight screws supplied from the Rack Mount Kit
3-a Fastening the brackets on the switch
To install the switch in a rack:
1.
First, align the holes on the bracket with the holes on both side of the
switch.
2. Insert screws into the holes and then fasten the bracket on one side of the
switch with a screwdriver.
3. Repeat Step 1 and 2 to fasten the bracket on the other side of the switch.
4. Mount the unit on the rack and align the notches on both brackets with
mounting holes on the rack, and then secure the unit with suitable screws.
3-b Mounting the Switch onto a Rack
Desktop Installation
1. Install self-adhesive rubber footpads on the bottom of the switch; peel of
the protective backing from the rubber pads and apply one at each marked