Product Features
▪
24+2-port Gigabit Ethernet Switch with 2 build-in Gigabit Ports
▪
Two auto-negotiating 10/100/1000 Mbps UTP ports which support 10/100
Mbps or 1000Mbps full-duplex with standard RJ-45 connectors.
▪
Auto negotiation supported by all 10/100 Mbps and Gigabit ports
▪
Supports IEEE802.3x flow control in full duplex and back pressure in half
duplex to prevent packet loss
▪
Automatic address-learning function to build the packet-forwarding
information table
▪
Supports two built-in Gigabit Copper ports
▪
Non-Blocking 9.6Gbps aggregate throughput
▪
Auto MDI/MDI-X Switching
▪
One Console port on the rear side for VLAN
、
Trunking & Priority
Configuration
▪
Aging function to automatically track changes in network configuration
▪
Store-and-forward mode to minimize erroneous packets on the network.
▪
Easy Plug and Play installation with no software to configure, saving time
and minimizing the potential for configuration errors
▪
Rack Mount Kit provided for installing the switch in a standard 19-inch
equipment rack, or for mounting on the wall
▪
Conformity to standards:
-
IEEE 802.3 10BASE-T standard
-
IEEE 802.3u 100BASE-TX standard
-
IEEE 802.3ab 1000BASE-T standard
-
IEEE 802.3x flow control
Disclaimer
All Trademarks belongs to their respective owners. GigaFast cannot be held
responsible for any damage made during the installation. GigaFast also reserves the
right to modify the manuals without notice. GigaFast is not responsible for typos,
misprints or grammatical errors on the manual or product boxes.
Summary of Contents for EE2400-G
Page 21: ......
